Aluminum Blade Ceiling Fans With Lights
Aluminum blade ceiling fans pair metal blades with wide spans for great rooms, garages, gyms and shops. The aluminum models here run from 72 to 120 inches, come in matte black and are fan-only, so plan your lighting separately. Read the buying guide
10 products
10 products
Products
-
AeroSpan 12 FT (144") HVLS Industrial Ceiling Fan with 5 Aluminum Blades
From$1,259.99
Choose Options$2,499.99Save 50% -
AeroVault 12FT(144 Inch) HVLS Industrial Ceiling Fan with PMSM Direct Drive
From$1,499.99
Choose Options$3,999.00Save 62% -
AeroVault 14/16FT HVLS Industrial Ceiling Fans with 6 Aluminum Blades
From$2,199.50
Choose Options$3,699.00Save 41% -
AeroVault 20/22/24 FT HVLS Industrial Ceiling Fans with 6 Aluminum Blades
From$3,199.50
Choose Options$5,399.00Save 41% -
AirForge 120" HVLS Industrial Ceiling Fan with PMSM 6/7/8-Blade Option
From$269.99
Choose Options$799.00Save 66% -
AeroForge 72" 8-Blade Aluminum Industrial Ceiling Fan Without Light
$129.99
Add to Cart$400.00Save 68%
Shop Aluminum Blade Ceiling Fans by Size, Space & Lighting
Choosing a Large Aluminum Blade Fan for Your Space
Start with the space, not the metal. If you searched for aluminum blade ceiling fans with lights, note that the aluminum models here are wide, fan-only designs. Measure the floor area and ceiling height, decide where your light will come from, then compare span, published airflow and mounting. The blade material is only one detail of the fan.
Settle the lighting plan first
With no light kit on the fan, the room needs its own light from recessed fixtures, pendants or lamps. Shops and gyms often have it already. If a great room's only light point is the fan box, a large fan with a built-in light is the better buy. See the lighting links above.
Size the span to the floor area
On the sizing chart, spaces of 350–500 sq. ft. take a 60–72 in. fan. Beyond 500 sq. ft., go to 72 inches or more, or use more than one fan. That is where the 84- to 108-inch models fit, while very large floors may call for an HVLS fan.
Separate industrial looks from HVLS
Industrial styling does not make a fan commercial-rated. A 72-inch industrial-look fan such as the AeroForge is a different product from the 120-inch AirForge, which is sold as an HVLS fan. Match the type of fan to the building first, then compare blade count, speeds and controls.
Plan clearance, mount and support
Wide blades need open ceiling, clear of walls, beams, lights and tall shelving, and at least 7 feet above the floor. High ceilings usually need a longer downrod; Breezary sells extension downrods in 24, 36, 48, 60 and 72 inch lengths. Use a fan-rated box, and bring in a licensed electrician for any new wiring.
Treat blades as matched parts
Never swap in generic metal blades because the size looks close. Length, shape, attachment points, weight and balance are designed together for each fan. If a blade is damaged, order the replacement made for that exact model. Ideally replace the whole set, so the fan stays balanced and clear of nearby surfaces.
| Rating | Where it fits | What to check |
|---|---|---|
| Dry | Indoor rooms without regular moisture. | Keep the fan inside those conditions. |
| Damp | Covered, protected areas such as covered porches. | A damp rating stated for that exact fan. |
| Wet | Spots that rain can reach. | A stated wet rating; never assume it from metal blades. |
Look up each fan's location rating before planning a covered patio, since a roof does not keep out humidity or wind-driven rain.
Aluminum Blade Ceiling Fans With Lights FAQs
Are there aluminum blade ceiling fans with lights?
Not among the aluminum models listed here, which are fan-only designs. For one fixture that gives both air and light, browse large or industrial ceiling fans with lights, which mostly use plywood or ABS blades. Or pair an aluminum fan with recessed, pendant or shop lighting.
Are aluminum fan blades better than ABS or plywood?
Not automatically. Aluminum is metal, ABS is molded plastic and plywood is layered wood, and each can work well. Choose the look you prefer, such as clean matte-black metal for a loft or garage. Then judge the fan by its size, motor, published airflow and location rating.
Do aluminum ceiling fan blades rust or corrode?
Aluminum does not behave like ordinary steel, but it is not immune to its surroundings. Exposure, the coating's condition and care all affect how blades look over time. Metal blades are not proof that the whole fan is corrosion-proof or outdoor-rated, so follow the care notes for the finish.
Can aluminum blade ceiling fans with lights go on a covered patio?
Only with the right rating on the complete fan. The motor, wiring and hardware matter as much as the blades. If a listing mentions covered areas but states no damp or wet rating, it belongs in a dry space. A garage counts as dry only if it stays dry.
Are aluminum blade ceiling fans noisy?
Not by nature. Noise usually comes from the motor, high speeds, loose hardware, unbalanced blades or an unsteady mount rather than from the metal. Install the fan on a secure, fan-rated support, tighten every blade screw, and use the lower speeds when you want a quieter room.
